How long does Thompson Water Seal last on concrete?

Water Seal can only be used on bare and uncoated brick, stone or concrete. How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years.

Can you use Thompson water Seal on concrete?

The Thompson's WaterSeal Clear Waterproofer is a multipurpose product that can be used on wood, brick and concrete.

How often does Thompson's water Seal need to be applied?

Thompson's WaterSeal includes a complete line of deck sealers and stains for protecting deck wood from moisture and sunlight. Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.

How long does Thompson water Seal still tacky?

The sealed surface is likely to dry eventually, after two to three days. However, sometimes it might have sticky residue for an entire week if the humidity is significantly high.

How often should I seal my concrete?

As a general rule of thumb, you should seal your driveway every one to three years. Here's a look at expert recommendations based on pavement type: Concrete. More durable than asphalt varieties, concrete driveways tend to last longer between sealing.

How to Apply Sealer to New and Old Concrete

How long will Concrete Sealer last?

Epoxy and urethane systems last between 5-10 years, closer to 5 if the surface experiences heavy traffic. Reactive penetrating sealers are the longest lasting concrete sealers, wearing away only if the substrate surface itself wears away.

Should you seal old concrete?

A: Yes! Old concrete can be sealed for the first time or resealed if it has been previously sealed with a concrete sealer. Before sealing old concrete you want to make sure you determine if the concrete has been previously sealed.

How many coats does Thompson's water Seal have?

One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson's^® WaterSeal^® Waterproofing Stains, you can clean your tools with soap and water. Let the deck dry for at least 24 hours and you're ready to replace the furniture.

How good is Thompson's water Seal?

Overall Score: 6.125

Overall, Thompson's WaterSeal Waterproofer Plus Clear Wood Protector is a clear disappointment. Any finish that offers zero ability to prevent UV graying should not be considered for your deck or exterior wood.

How do you remove Thompson's water Seal from concrete?

To use mineral spirits, wipe the spirits over the area with a cloth. Let it sit for a few minutes, then scrub the area with a scrub brush. To use a concentrated degreaser, follow the instructions on the label of your selected product. Some good choices for this are Krud Kutter or Simple Green.

Can you use a sprayer with Thompson's water Seal?

Answer: The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. There are no concerns about it eroding any of the seals inside of it.

Can you apply stain over Thompson Water Seal?

There is NO NEED TO REMOVE THE THOMPSON'S TO STAIN OR PAINT THE DECK OR RAILINGS. Follow the directions, You must wait at least 30-45 days (I recommend 6-12 months) before applying another product. The waterproofing nature of Thompson's precludes using a water based product as a stain or paint.

What is the best product to seal concrete?

• BEST OVERALL: Foundation Armor AR350 Wet Look Concrete Sealer.
• BEST BANG FOR THE BUCK: MasonryDefender Penetrating Concrete Sealer.
• BEST PENETRATING: Ghostshield Siloxa-Tek 8500 Penetrating Sealer.
• BEST ACRYLIC: Eagle Armor Seal Urethane Acrylic Concrete Sealer.
• BEST EPOXY: TotalBoat Table Top Epoxy Resin 1 Gallon Kit.

Can you seal concrete to make it waterproof?

After you complete a concrete job, don't neglect the single most important step to ensure that it lasts a lifetime: sealing. With a high-quality sealant—and this helpful guide—you can waterproof and protect your new concrete surfaces for years to come.

How do you keep water from coming up on a concrete floor?

Supporting Joints

Any joints in your concrete floor also invite water to seep in, and the best way to stop water in these areas is to seal them up with exterior-grade caulk.

Is Olympic better than Thompson Water Seal?

Thompson WaterSeal clear coat received a score of 12 out of 100 in Consumer Report's test of 28 clear decking finishes. Olympic Waterguard scored a 5 out of 100. You can expect WaterSeal to perform slightly better than Olympic Waterguard, so it is appropriate to say that WaterSeal is the superior product.

Is there a sealer for concrete?

There are two main types of concrete sealers: film-forming sealers and penetrating sealers. Film-forming sealers include acrylics, epoxies, and urethanes that form a coating on the surface of the concrete. Film-forming sealers, especially acrylics, are more susceptible to wear and will need to be reapplied frequently.

Is Thompson's water Seal a penetrating sealer?

Thompson's^® WaterSeal^® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration.

Is Thompson Water Seal milky white?

No. Thompson's^® WaterSeal^® Clear Multi-Surface Waterproofer applies white but dries clear and allows your wood to gray naturally over time. Prior to covering the entire surface, a test patch should be done in an inconspicuous place.

What colors does Thompson Water Seal come in?

Available Colors

• Chestnut Brown.
• Coastal Gray.
• Desert Tan.
• Harvest Gold.

Can you put too much sealer on concrete?

When the sealer is applied too heavily, the air displaced through the surface can't escape, and it forms a bubble in the sealer surface. Bubbling of a sealer can also occur if application is done in hot weather, or if the concrete is in direct sun.

Does power washing remove concrete sealer?

A pressure washer can remove old concrete sealers. The sealer can be removed from concrete by using a pressure washer with a wand or an orbital walk-behind model. Keep in mind, however, that even though this method is effective, it may not completely remove the old sealer.

Is it better to spray or roll concrete sealer?

“Certain sealers are better applied by spray because they are not formulated for rolling,” says Dean Owen, president of Arizona Polymer Flooring Inc. in Glendale, Ariz. “This is usually a function of the solvents used in the formulation. Slow-evaporating solvents are better for rolling.

How long does water based sealer last?

There are two types of acrylic sealers: water-based and solvent based, both of which have shorter life spans than both penetrating sealers and epoxies. They generally last 1 to 3 years.